RM RM Eye Manuel d'instructions télécharger pdf (Page 88)

MAINTENANCE

FUSE CHANGE

1 Make sure that the power switch of the main body is off and the power cable is off.

2 Remove the fuse holder by rotating it counterclockwise by a screwdriver.

3 Replace the fuse with the attached one.

4 After inserting, rotate the fuse holder clockwise by a screw driver while pushing it lightly.

WARNING

To avoid electric shocks during fuse change, be sure to unplug

the power cable before removing the fuse lid.

Also, do not plug the power cable leaving the fuse box open.

WARNING

Always use the attached fuse (3A 250V). Using any other type

may cause troubles and fire.

Changing the fuse

1 2 ... 83 84 85 86 87 88 89 90 91 92

Pas de commentaire

RM RM Eye Manuel d'instructions Page 88